Andy Sea

Andy Sea

Andy Sea is 58′ in length and has a beam of 20 feet. Powered by single John Deere 1635AFM75, (575hp @ 2100rpm), main engine, w/clutched PTO pump drive, w/single station engine panel, 12 volt start, keel cooled, dry exhausts, installed. There are two generators, one MER-John Deere 65kw gen. set in engine room and another 12 KW in Lazerette. Single station Kobelt manual hydraulic steering installed with two jog steering stations installed. UHMW caps and guards.  ¼” stainless skiff guard w/hawse hole. Two painted aluminum 950 gallon fuel tanks. One 300 gallon stainless steel water tanks. House finished with plastic laminate interior and teak trim. Galley is equiped with four burner electric range, refer-freezer, double stainless steel sink, 12 gallon hot water tank, microwave, and a dinette area.

Andy Sea Completed

Moved outside to Trailer
Trailering
Install Freestanding Mast
Booms Installed
Launching
At Our Dock
Heading Out For Sea Trials
Heading Down River
Sea Trials
Sea Trials
Sea Trials
Sea Trials

Andy Sea Under Construction

Hull Set-up
Pilothouse
Pilothouse on Foredeck
Aft Deck
Engine and Equipment Shelves Installed
Bow Thruster Installed
Gen-set Installed
Fabricating Freestanding Mast
Installing Guards
Installing Fuel Tanks
Installing Aft Deck
Lazz. Stainless Steel Water Tank & Generator Installed
Forward Cabin Sole Installed
Installing Fishhold Insulation
Pilothouse Going On
Pilothouse On
Freestanding Mast Ready to Install
Installing Freestanding Mast
Painting Stripes
Pilothouse Rough-In
Galley, Settee Rough-In
Focs’le Storage Area